Singer 14T957DC User Manual download pdf (Page 45)

In order for the Cover Stitch Plate to sit properly, you must set the seam width

finger to the “R” position.

TIPS FOR TRIPLE COVER STITCH

• Be sure to follow the threading sequence outlined above.

• Make sure needles are set-up in positions C, D, and E for the Triple Cover

Stitch. This is very well illustrated in the manual on page 15.

• Be sure to disengage moveable upper knife.

• Be sure to disengage the upper looper.

• Always start sewing on fabric.

• Never sew off the fabric. To remove fabric from machine, stop with the

needles up. Turn the handwheel towards you until you hear three

“clicks”. One for every needle. Stop – turn handwheel back (away from

you) until the needles are at the highest position. Lift presser foot, place

thumb on stitches and pull fabric back and away from the foot. The fabric

should pull away easily.

• Always reset the tension dials by re-selecting the stitch after threading the

serger.

1 2 ... 40 41 42 43 44 45 46 47 48

No comments

Singer 14T957DC User Manual Page 45