SINGER CLASS 99 User Manual download pdf (Page 51)

Class 99 & 99K

Joining Lace and Insertion (cont')

Place the second band (lace) into slot 4.

●

Adjust pressure to correct degree of lightness for even feeding.●

Use a short stitch length and balanced tensions.●

Hold both band edges against the end of the slots while stitching.●

French Seams

The edge-stitcher makes very fine French seams, so well adapted to sheer

fabrics where raw seam edges must be concealed.

Trim away seam allowances to ¼".

●

Lay seam edges together, right sides of fabric outward, and insert into slot

●

Move lug A to the left to position stitching 1/8" from the edge.●

Stitch and press.●

Fold with right sides of fabric together and insert into slot 1.●

Move lug A to extreme left, allowing just enough margin to conceal raw

edges.

●

Stitch.●

Tucking

Dainty tucks from "pin" width to ¼" may

be produced with the edge-stitcher.

Tucks are usually made on the

lengthwise grain of the fabric.

Draw a single thread from the

fabric, or measure from the

selvage to locate the first tuck on

the straight of the fabric grain.

●

Page 51

Table of Contents | Previous Page | Next Page

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

No comments

SINGER CLASS 99 User Manual Page 51