SINGER Confidence Quilter Instruction Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
42
INSERTING ZIPPERS AND PIPING
Use zipper foot to sew to the right or left of the zipper or close
to the cording.
INSERTING ZIPPERS
To sew down the right side, attach left side of zipper foot to
presser foot holder so that the needle passes through the
opening on the left side of the foot.
To sew down the left side, attach right side of foot to foot
holder.
HAND-LOOK QUILT STITCH
This stitch is designed to look like hand sewing for topstitching
and quilting.
1. Thread bobbin with desired top stitching color. When
sewing the machine will pull this thread to the top.
2. Thread machine with invisible or lightweight thread that
matches your fabric. This thread should not show.
3. Increase thread tension a little at a time and continue until
you acheive the desired appearance.
4. Start to sew.
PIPING
To pipe soft furnishings, cover cord with a bias strip of fabric
and pin or tack it to the main piece of fabric.
Attach right side of zipper foot to foot holder so that needle
passes through the opening on the right side of the foot.
Helpful Hint: Slight adjusting of the needle position to
sew closer to the piping may be accomplished with
the Stitch Width Control.
NOTE: For a dramatic appearance, experiment with
different tension and stitch length combinations.
Needle to left of foot
Aiguille à gauche du pied presseur
Aguja a la izquierda del
prensatelas
Needle to right of foot
Aiguille à droite du pied presseur
Aguja a la derecha del
prensatelas
STRAIGHT STITCH WITH AUTO
TIE-OFF FUNCTION
1. Press the foot control and the machine will sew 4 stitches
in forward and then 4 stitches in reverse and continue to
sew in forward until the foot control is released.
2. Push the reverse switch and the machine will sew 4
stitches in reverse and then 4 stitches in forward and stop.
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 81 82

Comments to this Manuals

No comments