Singer W614 User Manual download pdf (Page 22)

lEOLES-UPPER THREAOIM'G AfiD SEWING

■l Be sure zigzag needle plate and presser foot are in place.

2 Set needle position control 5 Fig.-25B at twin needle position. Tnis will set a stop

to prevent the zigzag width control moving beyond the number 3 position.

;j.. ,-o,,uv/ oj,'d..ioi/)g instructions for single needle with these exceptions;

a. place, two spools of thread, matching or contrasting in color, one on each spool

pin. ’

b. Lead both threads through arm thread guides.

c. Bring threads down and around tension discs with one thread passing between the

back discs and the other between the front discs.

:/dai both threads as one until you reach the needle eye.

"'/w :r;.> b'r-.'id through each needle eye(Fig. 26).

4. Tha rnaxirnurn zigzag stitch width that can be sewn when using twin

needle is at the number 3 setting of the zigzag width control.

Any position above the number 3 position will break the twin needle.

5. Straight stitching and decorative stitch designs can be produced

in the same manner as for single needle sewing except for the

maximum zigzag width.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

No comments

Singer W614 User Manual Page 22