Singer 14U454B Ultralock User Manual download pdf (Page 30)

When the lower looper thread is too loose

— Turn the lower looper thread tension dial

(yellow) toward a higher number.

— Or, turn the upper looper thread tension dial

(orange) to a lower number.

When the needle thread is too loose

- Turn the needle thread tension dial (green) to

a higher number.

• ADDITIONAL INFORMATION ABOUT

ROLLED HEMMING

* Hold the thread chain when you begin sewing to

keep it from curling into the seam.

* Place a slight tension on the material in the sewing

direction and a finer seam finish can be obtained.

* The minimum overedge stitch width that can be

obtained for rolled hemming is approximately 1.5

mm (1/16 inch) since the cutting width cannot be

set below 3.5mm (9/64 inch).

• TO SECURE THE ROLLED HEM THREAD

CHAIN

* Apply a small drop of liquid seam sealant to the

end of the seam. Allow to dry, then cut the chain

close to the stitches.

Note: Test the liquid seam sealant for color fastness

before use.

Needle

thread

Upper s c о per

thread

Topside

Lower looper

thread

Underside

Topside

Upper looper

thread

Lower looper

thread

Needle thread

Underside

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Wendy Bradburn 23 Apr 2024 | 20:11:26

I need a manual for singer ultralock serger model 14u454b. I inherited my mom's serger and I don't have one. All I have is a vhs

Singer 14U454B Ultralock User Manual Page 30