Singer 5102 User Manual download pdf (Page 12)

operating the machine

CONNECTING THE MACHINE

• Before plugging in your machine, be sure the

electrical information on the side of the

machine A, below the hand wheel, agrees

with the range marked on your electrical

meter.

• To turn on the machine, connect plug B to

machine and plug C to your socket outlet.

• To turn on the sewing light, press or turn

switch D as required. See illustration.

• To run the machine and control speed, press

the speed controller E with your foot. The

harder you press, the faster the machine will

sew.

CAUTION: Disconnect the power line plug from

the socket outlet when changing needles, feet or

needle plates or when leaving the machine unat

tended. This eliminates the possibility of starting

the machine by accidentally pressing the speed

controller.

IMPORTANT - Machines for Great Britain and some other countries having similar wiring standards are ship

ped from the factory without a plug for connection to the mains.

The wires in this mains lead are coloured In accordance with the following code:

Blue: Neutral (N)

Brown: Live (L)

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or

coloured black.

The wire which is coloured brown must be connected to the terminal which Is marked with the letter L or

coloured red.

If a 13 amp (BS 1363) plug is used a 3 amp fuse must be fitted, or If any other type of plug Is used a 5 amp fuse

must be fitted either in the plug or adaptor or at the distribution board.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Singer 5102 User Manual Page 12