Singer 5102 User Manual download pdf (Page 29)

• Bobbin and Feed Areas

To clean bobbin and feed areas, remove nee

dle plate, as instructed on page 5. Using soft

cloth or brush, clean area as illustrated.

Replace needle plate, as instructed on page 5.

• Exterior Areas

If necessary, a mild solution of soap and

water may be used on exterior areas to

remove stubborn stains. No other cleaning

liquid or powder should be used.

CHANGING THE LIGHT BULB

CAUTION: Before changing light bulb make sure

you have disconnected power line plug from

socket outlet.

Removing Bulb

CAUTION: This machine is designed to use a 15

watt maximum bayonet base bulb only.

Replacing Bulb

• Swing open face plate to left.

• Do not attempt to unscrew the bulb.

• Press it up into the socket and at the same

time turn bulb over in direction shown to

unlock the bulb pin and guide out of socket.

• Press new bulb into socket, with bulb pins en

tering slot of socket.

• Turn it over in direction shown to lock bulb in

position.

• Swing face plate back to right and snap it

closed.

27

1 2 ... 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments