Singer 9340 SIGNATURE User Manual download pdf (Page 69)

NARROW BRAID CORD FOOT

5.0~7.0

2.0~4.5

Note: The stitch width setting will depend on the size of cord being sewn.

Use this foot to create surface embellishment on all types of projects. The coil-shaped attachment

guides yarn, narrow braid or trim so that it feeds directly into the opening at the front of the

presser foot.

1. Attach the coil-shaped guide to the machine by placing the end through the opening at the back

of the presser foot holder.

2. Place the end of the yarn, braid or trim first into the coil, then into the hole of the presser foot,

then under the presser foot.

3. Stitch the braid in place. Depending on fabric being sewn, it may be desirable to place a

stabilizer under the fabric to prevent puckering.

4. If desired, you can use the screw at the front left of the foot to adjust the amount of space in the

foot's opening. This allows you to set the size of the opening so the cord feeds smoothly as you

sew, without moving from side to side.

* The narrow braid cord foot is an optional

accessory.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 90 91

No comments

Singer 9340 SIGNATURE User Manual Page 69