Singer 610U User Manual download pdf (Page 35)

BUTTONHOLES (Continued]

PROCEDURE

Fig. 4

1. Push disc follower releasing lever to the right and

set buttonhole stitch selecting dial to “Bl”. Posi

tion needle in fabric at point A. Lower presser

foot and stitch to point B. Stop the machine and

raise needle from fabric. (See Fig. 4)

Fig. 5

2. Push disc follower releasing lever to the right and

set buttonhole stitch selecting dial to “B2”. Start

stitching at point B and stop at point C. Raise

needle from fabric. (See Fig. 5)

1 2 3 4. 5

Fig. 6

3. To secure stitching, move stitch width selector to

“ 1 ” and take approximately three stitches to point

D. Then, cut opening for the button with the rip

per supplied with the machine.

CORDED BUTTONHOLES

Heavy cotton or buttonhole twist makes suitable filler

cords for raised buttonholes.

1. Place filler cord on the material, leaving sufficient

amount of cord for right side. (See Fig. 7)

2. Lower the foot, bringing the cord under the left

groove on the bottom side of the foot. Then, pro

ceed with stitching in the same method as stated

above except;

(1) After setting buttonhole stitch selecting dial to

“B2”, position needle in fabric at point E and

raise the foot.

(2) Lead end of cord at farther end to the right

around the needle as shown in Fig. 8.

(3) Lower the foot and continue to stitch.

3. Trim cord ends after a buttonhole is completed.

(See Fig. 9)

Leave Position

sufficient needle

amount of at point

cord* E.

Cut cord

end.

Fig. 7

Fig. 8

Fig. 9

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Comments to this Manuals

No comments

Singer 610U User Manual Page 35

Comments to this Manuals

Related products and manuals for Sewing machines Singer 610U