Singer 6212 User Manual download pdf (Page 10)

CHANGING THE NEEDLE PLATE (A),(C)

Your machine comes with the General Purpose Needle Plate (A) attached. The

Straight Stitch Needle Plate (C) may be purchased at your sewing center and can be

attached as follows:

• Raise needle and presser foot.

• Open slide plate.

• Lift up needle plate from right corner

and slide out from under foot.

• To replace needle plate, slide it

under pin (1) and push it firmly to the

left.

• Press down until it snaps into place.

ATTACHING THE FEED COVER (F)

The feed cover is used to keep the feed from moving the fabric when attaching a

button, darning or sewing free-motion embroidery. To attach it, follow the directions

below;

Raise needle and presser foot.

Open slide plate.

Slide feed cover on top of needle

plate, pressing tabs (1) and (2) into

holes.

Close slide plate.

To remove, open slide plate and lift

front edge of cover; pull it away.

REMOVING THE EXTENSION TABLE (6212)

Free arm sewing makes it easier to sew hard-to-reach areas.

To change machine for free arm

sewing, lift right edge (1) of extension

table, slide it to the left and off the

machine.

To replace the extension table, slide

it to the right keeping it even with the

free arm, until the tabs on the right lock

into place.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

Singer 6212 User Manual Page 10