Singer 9618 User Manual download pdf (Page 71)

CLEANING YOUR MACHINE

CAUTION: Before cleaning your machine, dis

connect power line plug from your socket out

let.

With a soft cloth or lint brush, clean all points

indicated by arrows, especially the bobbin

case area and feed. Also, clean exposed parts.

If necessary a mild solution of soap and water

may be used to remove stubborn stains. No

other cleaning liquid or powder should be

used.

Periodically apply a drop of oil only to the

areas indicated after cleaning.

CAUTION: Do not attempt to adjust the motor

belt Drive. Refer to your nearest Singer Service

Centre should any adjustments be required.

REMOVING FACE

PLATE

Loosen screw D (do not remove).

Remove face plate screw E then remove face

plate by drawing it toward you. Replace face

plate by sliding top edge of plate under edge

of arm top cover. Tighten screws E and D.

REPLACING SLIDE

PLATE

Place slide plate in slide way with the front

edge close to, but not covering, the retaining

spring

F. With a small screwdriver, lift each

end of the spring into each of the side

grooves on the under slide plate. Draw the

slide plate gently toward you to fully engage

the spring. Close slide plate.

69

1 2 ... 66 67 68 69 70 71 72 73 74

Comments to this Manuals

No comments