Singer P-1250 PROFESSIONAL Quick-Start Guide User Manual download pdf

(Consult Instruction Book for bobbin winding instructions)

1. Slide bobbin cover plate toward you. Insert wound bobbin

into bobbin case with thread spooling off to the left.

2. Guide thread to left through notch A and then pull straight

back toward needle so that it passes through notch B.

3. Leave several inches of thread laying across top of bobbin

toward the back of the machine.

4. Slide bobbin cover plate back intro position. thread tail

should be visible, sticking out at top of cover.

5. Hold top (needle) thread and turn handwheel toward you

until needle goes to its lowest and then its highest point.

Raise the presser foot using the presser bar lifter.

6. Gently pull top thread until lower (bobbin) thread comes

up in the form of a loop.

7. Use the flat side of a seam ripper or a pin to open up

bobbin thread loop until end is visible.

8. Pull both thread tails straight back under presser foot.

SEWING MACHINE

BOBBIN CASE THREADING INSTRUCTIONS

P/N: 357626-002REV.1

1 2

Page 1

(Consult Instruction Book for bobbin winding instructions)1. Slide bobbin cover plate toward you. Insert wound bobbin into bobbin case with thread

This machine features a specialEasy Threading System. Even if youhave sewn before, take the time tolearn how to properly thread themachine,

No comments

Singer P-1250 PROFESSIONAL Quick-Start Guide User Manual