Singer 7050 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
I
Do not pull or push fabric while stitching. This may deflect the needle causing
it to break.
I Before removing the bobbin case, remove plug from the socket outlet.
I For double insulated machines, when servicing, use only identical Singer
replacement parts. See instructions for Servicing of Double-Insulated
Appliances.
Never operate the machine if it has a damaged cord or plug, if it is not
working properly, if It has been dropped or damaged, or dropped into
water. Return the machine to the nearest authorized dealer or Service Center
for examination, repair, electrical, or mechanical adjustment.
Never operate the machine with any air openings blocked. Keep ventilation
openings of the machine and foot controller free from the accumulation of
lint, dust, and loose cloth.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
Do not allow to be used as a toy. Close attention is necessary when the
machine is used by or near children.
SERVICING OF DOUBLE-INSULATED PRODUCTS. In a double-insulated
product, two systems of insulation are provided instead of grounding. No
grounding means Is provided on a double-insulated product, nor should a means
for grounding be added to the product. Servicing of a double-insulated product
requires extreme care and knowledge of the system, and should be done
only by qualified service personnel. Replacement parts for a double-insulated
product must be identical to those parts in the product. A double-insulated
product is marked with the words “DOUBLE-INSULATION” or “DOUBLE
INSULATED”.
SAVE THESE INSTRUCTIONS
Servicing should be performed by an authorized service representative.
This product is intended for household use.
FOR EUROPEAN AND SIMILAR TERRITORIES:
This product is suppressed for radio and television interference with the
International Electrotechnical Commission requirements of the CISPR.
Mchines for Great Britain and some other countries having similar wiring
standards are shipped from the factory without a plug for connection to the
mains. The wires in this mains lead are coloured in accordance with the
following codé:
Blue: neutral (N) Brown: live (L)
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black. The wire which is coloured brown
must be connected to the terminal which is marked with the letter L or coloured
red. If a 13 Amp. (BS 1363) plug is used, a 3 Amp. fuse must be fitted, or if
any other type of plug is used, a 5 Amp. fuse must be fitted either in the plug
or adaptor or at the distribution board. Neither cord is to be connected to the
earth terminal of a three-pin plug.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 50 51

Comments to this Manuals

No comments