Singer 1030 Creative Touch User Manual download pdf (Page 12)

A

(TV

f

1^

r

nl

f

needles

style 2020 Style 2025

Regular Needle 5ty|g 2045 Twin-Needle

Ball Point

Yellow Band Needie

To Hold Small Spools

\ To Hold Small Tubes

To Hold Large Spools

The needle you use should be straight and not

bent to ensure perfect stitch formation and

needle penetration through the fabric. The

needle should also be fine enough to prevent

the fabric from being marred with large

punctures, yet heavy enough to pierce the

fabric without being bent or deflected.

Remember, too, that the eye of the needle

must be large enough for the thread to pass

through freely; too fine a needle will cause the

thread to fray.

IMPORTANT: Your SINGER sewing machine

has been designed to obtain best results with

SINGER* needles. You should follow the

recommendations in this instruction book and

on the needle package for correct style and

size of needle for different types and weights

of fabric.

• Style 2020 (15x1) needles, for all-purpose

sewing.

• Style 2045 bail-point Yellow Band* need\es,

for sewing synthetic knits and stretch

fabrics.

• Style 2025 needle, for twin-needle decora

tive stitching.

CHANGING THE NEEDLE

1. Raise needle to its highest point by turning

the hand wheel toward you. Loosen needle-

clamp screw, and remove the needle.

2. Insert new needle in clamp, with the flat

side of the needle to the back; push it up as

far as it will go.

3. Tighten needle-clamp screw.

SPOOL HOLDER

Place spool or tube of thread on horizontal

spool pin. If spool has a retaining slit, the slit

should be placed against the spool cushion to

the right. Select correct spool holder accord

ing to the type and diameter of spool being

used. The diameter of the end of the spool

holder should always be larger than that of the

spool itself. Press holder firmly against spool

to prevent it from turning.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 76 77

Comments to this Manuals

No comments