Singer 1030 Creative Touch User Manual download pdf (Page 46)

rilì

Inserting Cord in One-step Buttonhole Foot

CORDED BUTTONHOLES

Corded or raised buttonholes are made by

stitching over a filler cord. Embroidery or

crochet threads make good filler cords, but

double strands of sewing thread or a sew-off

chain of needle and bobbin thread may also

be used.

Inserting Cord in

One-step Buttonhole Foot

• Raise foot. Hold filler cord in both hands,

and insert it between foot and underplate,

from left side (the side opposite underplate

tab). Insert one end of the filler cord in the

right notch in front of foot. Lead cord back

under foot and loop it up and over the cord

spur from right to left.

• Bring cord forward, between foot and under

plate, and secure end in left notch.

Procedure

• Insert cord in buttonhole foot as shown and

sew buttonhole in the usual way (see page

37 for one-step buttonholes).

• When stitching is completed, release cord

from foot and remove work by drawing it to

the back of the machine.

• Draw the loop of filler cord into the but

tonhole stitching by holding fabric at the

starting end of the buttonhole with one hand

and pulling ends of filler cord firmly with the

other.

• Trim ends of filler cord. Cut button opening.

CUTTING BUTTON OPENING

Before cutting button opening, place a pin

across the cutting space at each end of the

buttonhole to protect the bar tacks. Using a

pair of small scissors, insert blade in center of

cutting space and cut from this point in both

directions. Slip button through opening of

test buttonhole to check length. For informa

tion on adjusting buttonhole length, refer to

page 39.

40

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 76 77

Comments to this Manuals

No comments