Singer 1030 Creative Touch User Manual download pdf (Page 37)

SEWING A CHAINSTITCH SEAM

Stitch: Straight i

Stitch Width:

Needle Position: As.

stitch Length: 10 to 12only

Take-up Lever: Thread Eyelet

Bobbin-case Insert

Straight-stitch Plate

Zig-Zag Foot

* •

1. Draw thread under foot to back of machine,

hold thread end and position needle in

fabric. Lower foot.

• Start machine and stitch to end of seam,

ending with needle in fabric. Do not at

tempt to stitch in reverse or sew off the

fabric edge.

• Raise presser foot and turn hand wheel to

raise take-up lever to its highest point.

2. Pass scissors under presser foot and draw

out a loop of thread.

3. Hold loop and cut thread about an inch

from end of stitching.

4. Remove fabric from machine by pulling it

straight back, away from you. The thread

end will pull through fabric to the underside

and form a temporary lock.

• Instructions for releasing the chain from

the machine without forming a temporary

lock in the fabric are given on the follow

ing page.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 76 77

No comments

Singer 1030 Creative Touch User Manual Page 37