Singer 7050 User Manual download pdf (Page 26)

SEWING CURVED SEAMS

• Baste seam line.

• Use a short stitch for elasticity and

strength.

• Guide fabric to follow curve.

• The seam guide may also be used

when sewing curved seams. Attach

seam guide at an angle so that the

edge closer to the needle acts as a

guide.

DARNING

Mend worn or torn areas using the

Darning and Embroidery Foot.

• Trim ragged edges and baste a backing

on wrong side of tear.

RECOMMENDED SETTINGS

Stitch Selection:

Straight Stitch

Stitch Width:

--

...

. H

Stitch Length:

0

Foot: Darning and Embroidery (G)

Needle Plate:

General Purpose (A)

• Attach Feed Cover (F).

• Place area to be darned, right side up,

under presser foot; lower foot.

• Stitch, guiding fabric back and forth,

until entire area is filled in.

FREE MOTION EMBROIDERY

In free motion embroidery, you sew without

a presser foot, and control the fabric with

an embroidery hoop.

RECOMMENDED SETTINGS

Stitch Selection:

Straight Stitch or

Zig-Zag

Stitch Width:

- --wwwwwyVlA

0 It

Stitch Length:

0

Foot: Remove foot with shank

Needle Plate:

General Purpose (A)

• Attach Feed Cover (F).

• Be sure to lower presser foot lifter.

• When embroidering, as shown, use

straight stitches for stems, and zig-zag

stitches, at varying widths, for leaves

and petals. Lengthen stitches by mov

ing the hoop faster or slower.

NOTE: The Darning and Embroidery Foot

(G) may be used to help control fabric.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 50 51

Comments to this Manuals

No comments