SINGER 9980 | QUANTUM STYLIST Instruction Manual Page 82

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 81
82
USING THE EVEN-FEED
FOOT
The Even-feed Foot equalizes the feeding of the
upper and lower layers of fabric and improves the
matching of plaids, stripes, and patterns. This foot
helps to prevent uneven feeding of very difficult
fabrics. Use this foot also for sewing quilts.
No. 1, 2, or 9
Even-feed Foot
A.ATTACHING THE EVEN-FEED FOOT
1. Remove the presser foot and holder. (See page
14)
2. The arm of even-feed foot should rest on the
shaft of the needle clamp screw.
3. Slide the attaching head from your left to right
so that it is fitted into the presser bar.
4. Tighten the presser foot thumb screw.
B.SEWING
Hold upper thread lightly as you start to sew.
CONTINUOUS
DECORATIVE PATTERN
Use the Satin Foot for continuous decorative stitch
patterns.
This foot has a full indentation on the underside to
easily allow closely spaced zigzag stitches and
fabric to feed freely under foot.
No. 19-100
Satin Foot (B)
To customize the continuous decorative stitch
pattern, you may adjust the length and width of
pattern.
Experiment with fabric scraps until you achieve the
desired length and width.
A.SEWING LIGHTWEIGHT FABRICS
When sewing lightweight fabrics, it is suggested
that you use stabilizer on the backside of the
fabric.
Page view 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 107 108

Comments to this Manuals

No comments