SINGER Stylist II Instruction Manual download pdf (Page 53)

REMOVING STITCHES FROM SEWN FABRIC

To remove stitches already sewn, snip off needle thread(s) at intervals and pull out looper

thread(s).

CORDED OVERLOCK

Corded overlock can be used to strengthen shoulder, sleeve or side seams when making knitted

garments. As a decorative feature, you can use knitting yarn of contrasting colors to further

enhance your garment. Your machine is equipped with a presser foot which has been designed to

feed cord or yarn to the left or right of the stitch. Follow directions as follows:

1. Place a “ller” cord, such as a crochet cotton, gimp, wool, knitting yarn, or shirring elastic at

the rear of the machine spool pin. Pass the cord through the cord guides (1) and (2) and then

through the left needle thread guide (3). See Fig. 1.

2. Insert the cord through either the front or rear hole on the presser foot. Pass it under and to the

rear of the foot.

3. Place the fabric under the presser foot as usual. Start at a slow speed, making sure the cord is

feeding correctly. Increase speed as needed.

FOR JOINING SHOULDERS OR SLEEVES, pass the cord through the front hole in the presser

foot. Be sure the cord is between the left and right needle threads as it is guided through the front

hole. (Fig. 2)

FOR JOINING SIDE SEAMS, pass the cord through the rear hole in the presser foot. Be sure it is

positioned under the right needle thread. (Fig. 3)

FOR DECORATIVE EFFECTS, pass contrasting color cords through either the front or rear hole in

the presser foot, or pass cord through both holes.

FOR MAKING WAVY EDGES OR HEMS, (Fig. 4) pass heavy monolament thread through the

rear hole in the presser foot and use a Rolled Hem. (See pages 38-39).

Fig. 2

Fig. 3

Fig. 4

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 66 67

No comments

SINGER Stylist II Instruction Manual Page 53