Singer 14J250 Stylist Serger User Manual Page 49
- Page / 67
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
48
SETTING DIFFERENTIAL FEED
Set by simply moving the differential feed control dial in the direction desired, referring to the chart below.
The adjustment can be made between 0.7 (negative effect) and 2 (positive effect). These settings
give the best ratio of feeding.
For normal sewing without differential feed, set the dial on 1.
The lever can be reset even while sewing.
FOOT PRESSURE REGULATOR
Presser foot pressure has been correctly set at the factory, so you do not need to adjust it for most
ordinary sewing. If adjustment is necessary, turn the foot pressure regulator to a higher number to
increase or to a lower number to decrease pressure.
SEWING WITH EXTRA HEAVYWEIGHT FABRIC OR MULTIPLE
LAYERS OF FABRIC
A wide range of fabric can be sewn on this machine. It is recommended that you tighten the screw
as illustrated when sewing with extra heavy weight fabrics or multiple layers of fabric. Open the
working table to make adjustments.
When sewing with light or normal weight fabric, loosen the screw on the cutter release mechanism,
located below the slot in the needle plate. Or turn the overedge cutting width dial to adjust cutting
width for your fabric.
The machine is set at the factory for normal weight fabric.
Illustration *
I
: Differential feed control dial
*
II
: Increase
*
III
: Decrease
*
IV
: Tighten
*
V
: Loosen
*
VI
: Cutter release mechanism screw.
EFFECT AND APPLICATION TYPE OF FEEDING SETTING
FEED RATIO REAR:
FRONT
Waver-free seams,
Gathering
Positive differential feed 1-2 |-----------|----------------|
No differential feed Neutral feed 1 |--------------|-------------|
Pucker-free seams Negative differential feed 0.7-1 |-----------------|----------|
- INSTRUCTION MANUAL 1
- MANUEL D’INSTRUCTION 1
- MANUAL DE INSTRUCCIONES 1
- TABLE OF CONTENTS 5
- TABLE DES MATIERES 5
- INDICE DE CONTENIDOS 6
- 1. KNOWING YOUR SEWING 7
- MACHINE 7
- 1. PRINCIPALES PARTES DE LA 8
- MAQUINA 8
- 1. VOTRE MACHINE A COUDRE 8
- ACCESSORIES 9
- ADDITIONAL ACCESSORIES 9
- ACCESSOIRES 10
- ACCESSOIRES OPTIONNELS 10
- ACCESORIOS 10
- ACCESORIOS OPCIONALES 10
- SETTING UP YOUR MACHINE 11
- MONTAJE DE SU MAQUINA 12
- BRANCHEMENT DE LA MACHINE 12
- PREPARATION FOR THREADING 13
- THREAD GUIDE POLE 13
- PREPARATION A L’ENFILAGE 14
- BARRA DEL PORTA CARRETES 14
- SPOOL NETS 15
- CUTTING WIDTH GAUGE 17
- THREAD CUTTER 17
- CHANGING PRESSER FEET 17
- CHANGING NEEDLE 17
- TABLEAU DES FILS ET MATIERES 19
- MATERIALS, HILOS Y AGUJAS 20
- 2. STARTING TO SEW 21
- 2. COMMENCER A COUDRE 22
- 2. EMPEZAR A COSER 22
- THREADING UPPER LOOPER 23
- ENFILAGE DU BOUCLEUR 24
- SUPERIEUR 24
- ENHEBRAR EL ANCORA SUPERIOR 24
- THREADING NEEDLES 25
- ENFILAGE DES AIGUILLES 26
- ENHEBRAR AGUJAS 26
- NEEDLE THREADER 27
- ENFILEUR D’AIGUILLE 28
- ENHEBRADOR DE LA AGUJA 28
- HELPFUL HINTS 29
- REPLACING THREAD SPOOLS 29
- CUTTING NEEDLE THREAD 29
- TESTER LA FORMATION DU POINT 32
- COMPROBAR LOS SOBREHILADOS 32
- SETTING CHART 33
- TABLA DE FIJACION 35
- CONVERTING TO TWO-THREAD USE 37
- RECOMMENDED THREAD 39
- FIL RECOMMANDE 40
- HILO RECOMENDADO 40
- ADJUSTING THREAD TENSIONS 41
- TWO-THREAD USE 41
- FOUR-THREAD USE 41
- REGLAGE DES TENSION 42
- UTILISATION A DEUX FILS 42
- UTILISATION A QUATRE FILS 42
- AJUSTAR LAS TENSIONES DE LOS 43
- EMPLEO DE DOS HILOS 43
- EMPLEO DE CUATRO HILOS 43
- ADJUSTING STITCH LENGTH 45
- Stitch nger (B) 45
- DIFFERENTIAL FEED 47
- POSITIVE DIFFERENTIAL FEED 47
- NEGATIVE DIFFERENTIAL FEED 47
- SETTING DIFFERENTIAL FEED 49
- FOOT PRESSURE REGULATOR 49
- LAYERS OF FABRIC 49
- BASIC TECHNIQUES 51
- TURNING INSIDE CORNER 51
- TURNING CURVED EDGES 51
- CORDED OVERLOCK 53
- DECOUDRE UNE COUTURE 54
- SURJET RENFORCE 54
- PESPUNTE ENCORDONADO 54
- DECORATIVE EFFECTS 55
- EFFETS DECORATIFS 56
- EFECTOS DECORATIVOS 56
- IMPORTANT 57
- UTILISATIONS DU DIFFERENTIEL 58
- APLICACIONES DEL TRANSPORTE 58
- DIFERENCIAL 58
- IMPORTANTE 58
- 3. CARING FOR YOUR MACHINE 59
- 3. ENTRETIEN DE LA MACHINE 60
- 3. CUIDADOS PARA SU MAQUINA 60
- CLEANING AND OILING 61
- NETTOYAGE ET LUBRIFICATION 62
- LIMPIEZA Y ENGRASE 62
- 5. OPTIONAL ACCESSORIES 65
- PIED POUR CORDONNET ENROBE 66
- PIED POSE PERLES 66
- PRENSATELAS PARA PERLAS 66
- Part No. 82338 67
- 67
Related products and manuals for Sewing machines Singer 14J250 Stylist Serger
Sewing machines Singer 9100 User Manual
(84 pages)
(84 pages)
Sewing machines Singer 14T968DC User Manual
(74 pages)
(74 pages)
Sewing machines Singer 14T968DC User Manual
(74 pages)
(74 pages)
Sewing machines Singer 1507 User Manual
(88 pages)
(88 pages)
© 2020, manymanuals.com. All rights reserved. | 2.421 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals