Singer 57815 User Manual download pdf (Page 56)

SINGER

Attaching a button

Recommended settings

Stitch Selection: Zig-Zag Stitch

Needle Position:

Stitch Width: To suit Button

Foot: Button Sewing (H) (Optional)

Needle Plate: General Purpose (A)

Attach Feed Cover (F)

Note: Before you can attach a button, the bobbin thread

must be brought up through the hole in the feed

cover.

Set stitch width at ( i ), and needle position selector

at ( L )• Position button under foot and lower the

needle into the center of the left hole. Lower the

foot. Turn hand wheel toward you until needle rises

out of button and is above the foot.

Move stitch width selector until needles is over the

other hole in the button. Then, when you begin to

stitch, the needle should enter into the right hole of

the button. Take six or more zigzag stitches to attach

button and finish with the needle on the left side.

To fasten stitching, adjust width to ( i ) and take

three or four stitches. Remove work, draw threads to

underside, fasten, and trim.

A r

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 83 84

No comments

Singer 57815 User Manual Page 56