Singer 8763 CURVY User Manual download pdf (Page 16)

THREADING THE BOBBIN THREAD

1. Raise the needle to its highest position by rotating the hand

wheel counter clockwise.

2. Remove the bobbin cover plate by pushing the release

button to the right. Bobbin cover will pop up sufciently to

allow you to remove the cover.

3. Insert the bobbin making sure the bobbin rotates counter-

clockwise when you pull the thread.

4. Pull thread through the slot (A) and then to the left.

5. With a finger held gently on top of the bobbin, pull the

thread until it stops in the slot (B). Then pull the thread

along the groove on the needle plate until it is snipped with

cutter on the top left.

6. Replace the clear bobbin cover plate onto the needle plate.

NOTE: Sewing can be started without picking up the

bobbin thread.

Groove

Cannelure

Surco

Cutter

Coupeur

Cortador

NOTE: This is a very important step. The bobbin

must rotate counterclockwise when thread is pulled.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

No comments

Singer 8763 CURVY User Manual Page 16