Singer 14J250 Stylist Serger User Manual Page 65
- Page / 67
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
64
PIPING FOOT
Prepare a piece of ready-made piping.
Place piping between seam edges with piping extending beyond the seam line, toward the
garment. Pin or baste and stitch the seam.
Flat or folded braid or ribbon can be used in straight seams.
Use for decorating edges of collars, cuffs, pockets, etc.
PEARL FOOT
1. PEARLS ALONG AN EDGE:
Set for left needle (remove right needle) 3-thread overlock.
Set tensions as follows:
Left needle: 4
Upper looper: 1 - 2
Lower looper: 7 - 8
SEW:
• Remove Standard presser foot. Replace with Pearl foot.
• Remove stitch nger as for rolled edge.
• Lower cutter to lowest position. Close front covers.
• Raise the needle to it’s highest position.
• Place pearls in the channel on the right side of the foot with 2" of pearls extending behind foot.
• Take one stitch with the hand wheel to secure the pearls.
• Follow edge of fabric along fabric guide on Pearl foot.
• Sew pearls on the edge of fabric.
• Return cutter to original position when nished.
2. PEARLS SEWING WITH A FLATLOCK STITCH:
FABRIC:
Medium weight woven
2 or 4 mm pearls
Set for a 3-thread at lock, left needle only. See pg. 32
SEW:
• Remove Standard presser foot. Replace with Pearl foot.
• Insert Stitch nger B
• Lower cutter to lowest position. Close front cover.
• Raise needle to it’s highest position.
• Place pearls in channel on right side of the foot with 2" of pearls extending behind foot.
• Take one stitch with the hand wheel to secure the pearls.
• Sew pearls on with the left needle just catching the fold of the fabric.
• Pull at lock open.
5. OPTIONAL ACCESSORIES
- INSTRUCTION MANUAL 1
- MANUEL D’INSTRUCTION 1
- MANUAL DE INSTRUCCIONES 1
- TABLE OF CONTENTS 5
- TABLE DES MATIERES 5
- INDICE DE CONTENIDOS 6
- 1. KNOWING YOUR SEWING 7
- MACHINE 7
- 1. PRINCIPALES PARTES DE LA 8
- MAQUINA 8
- 1. VOTRE MACHINE A COUDRE 8
- ACCESSORIES 9
- ADDITIONAL ACCESSORIES 9
- ACCESSOIRES 10
- ACCESSOIRES OPTIONNELS 10
- ACCESORIOS 10
- ACCESORIOS OPCIONALES 10
- SETTING UP YOUR MACHINE 11
- MONTAJE DE SU MAQUINA 12
- BRANCHEMENT DE LA MACHINE 12
- PREPARATION FOR THREADING 13
- THREAD GUIDE POLE 13
- PREPARATION A L’ENFILAGE 14
- BARRA DEL PORTA CARRETES 14
- SPOOL NETS 15
- CUTTING WIDTH GAUGE 17
- THREAD CUTTER 17
- CHANGING PRESSER FEET 17
- CHANGING NEEDLE 17
- TABLEAU DES FILS ET MATIERES 19
- MATERIALS, HILOS Y AGUJAS 20
- 2. STARTING TO SEW 21
- 2. COMMENCER A COUDRE 22
- 2. EMPEZAR A COSER 22
- THREADING UPPER LOOPER 23
- ENFILAGE DU BOUCLEUR 24
- SUPERIEUR 24
- ENHEBRAR EL ANCORA SUPERIOR 24
- THREADING NEEDLES 25
- ENFILAGE DES AIGUILLES 26
- ENHEBRAR AGUJAS 26
- NEEDLE THREADER 27
- ENFILEUR D’AIGUILLE 28
- ENHEBRADOR DE LA AGUJA 28
- HELPFUL HINTS 29
- REPLACING THREAD SPOOLS 29
- CUTTING NEEDLE THREAD 29
- TESTER LA FORMATION DU POINT 32
- COMPROBAR LOS SOBREHILADOS 32
- SETTING CHART 33
- TABLA DE FIJACION 35
- CONVERTING TO TWO-THREAD USE 37
- RECOMMENDED THREAD 39
- FIL RECOMMANDE 40
- HILO RECOMENDADO 40
- ADJUSTING THREAD TENSIONS 41
- TWO-THREAD USE 41
- FOUR-THREAD USE 41
- REGLAGE DES TENSION 42
- UTILISATION A DEUX FILS 42
- UTILISATION A QUATRE FILS 42
- AJUSTAR LAS TENSIONES DE LOS 43
- EMPLEO DE DOS HILOS 43
- EMPLEO DE CUATRO HILOS 43
- ADJUSTING STITCH LENGTH 45
- Stitch nger (B) 45
- DIFFERENTIAL FEED 47
- POSITIVE DIFFERENTIAL FEED 47
- NEGATIVE DIFFERENTIAL FEED 47
- SETTING DIFFERENTIAL FEED 49
- FOOT PRESSURE REGULATOR 49
- LAYERS OF FABRIC 49
- BASIC TECHNIQUES 51
- TURNING INSIDE CORNER 51
- TURNING CURVED EDGES 51
- CORDED OVERLOCK 53
- DECOUDRE UNE COUTURE 54
- SURJET RENFORCE 54
- PESPUNTE ENCORDONADO 54
- DECORATIVE EFFECTS 55
- EFFETS DECORATIFS 56
- EFECTOS DECORATIVOS 56
- IMPORTANT 57
- UTILISATIONS DU DIFFERENTIEL 58
- APLICACIONES DEL TRANSPORTE 58
- DIFERENCIAL 58
- IMPORTANTE 58
- 3. CARING FOR YOUR MACHINE 59
- 3. ENTRETIEN DE LA MACHINE 60
- 3. CUIDADOS PARA SU MAQUINA 60
- CLEANING AND OILING 61
- NETTOYAGE ET LUBRIFICATION 62
- LIMPIEZA Y ENGRASE 62
- 5. OPTIONAL ACCESSORIES 65
- PIED POUR CORDONNET ENROBE 66
- PIED POSE PERLES 66
- PRENSATELAS PARA PERLAS 66
- Part No. 82338 67
- 67
Related products and manuals for Sewing machines Singer 14J250 Stylist Serger
Sewing machines Singer 9100 User Manual
(84 pages)
(84 pages)
Sewing machines Singer 14T968DC User Manual
(74 pages)
(74 pages)
Sewing machines Singer 14T968DC User Manual
(74 pages)
(74 pages)
Sewing machines Singer 1507 User Manual
(88 pages)
(88 pages)
© 2020, manymanuals.com. All rights reserved. | 2.372 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals