Singer 5554 Heavy Duty Combo User Manual download pdf (Page 53)

Raise the presser bar (a) with the presser foot lifter. Loosen

or remove the presser shank screw. Line up the opening in

the shank with the opening on the presser bar and then

tighten the screw. (1)

dge/ quilting

Attaching the presser foot

Removing the presser foot

Attaching the e guide

Attention:

Lower the presser foot shank (b) using the presser foot lifter,

until the cut-out (c) is directly above the pin (d). (2) The

presser foot (f) will engage automatically.

Raise the presser foot using the presser foot lifter. (3)

Raise the lever (e) and the foot disengages.

Attach the e guide (g) in the slot as illustrated.

Adjust as needed for hems, pleats, quilting, etc. (4)

Turn power switch to off ("O") when carrying out any of

the above operations!

Attaching the Presser Foot Shank

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 120 121

No comments

Singer 5554 Heavy Duty Combo User Manual Page 53