Singer 2009 ATHENA User Manual Page 34
- Page / 68
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
32
STRAIGHT STITCHING
Straight stitch is most frequently used for all types of sewing.
Let’s begin by following the steps below.
1. SETTINGS
Presser foot - General Purpose Foot
Thread tension control - AUTO
A. Thread tension control
B. Reverse stitch switch
C. Presser foot lifter
D. Stitch length control
E. Needle position control
2. Pull both threads under the presser foot toward the back of
the machine, leaving about 6” (15cm) clear.
3. Place the fabric under the presser foot and lower the
presser foot lifter.
4. Turn the hand wheel counter clockwise until the needle
enters the fabric.
5. Start the machine. Guide the fabric gently with your hands.
When reaching the edge of the fabric, stop the sewing
machine.
6. First turn the handwheel counter clockwise until the needle
is at its highest position, then raise the presser foot, draw
the fabric to the rear and cut off excess threads with the
thread cutter located on the top of face cover as shown.
KEEPING SEAMS STRAIGHT
To keep the seam straight, use one of the numbered guide
lines on the needle plate. The numbers indicate distance from
the needle at its center position.
The guide line on the bobbin cover plate is 1/4" (6mm) seam
guide line which is used for piecing quilt blocks and also for
narrow seams, such as those in doll clothes or baby garments.
NOTE: To secure the stitching and avoid raveling,
press the reverse stitch button and sew a few
stitches at the start and end of the seam.
NOTE: The Needle Plate has both Metric and Inch
Markings as an aid for guiding your fabric when
sewing a seam.
NOTE: Based upon the weight of the fabric, slight
“ne tuning” of the tension may be desired.
D
E
NOTE: Since a straight stitch has no width, the
stitch width control is used to change the needle
position.
C
A
B
1
6
5
2
3
4
3/4" (19
mm
)
5/8" (16
mm
)
1/2" (13
mm
)
3/8" ( 9
mm
)
1/4" ( 6
mm
)
- INSTRUCTION MANUAL 1
- MANUEL D’INSTRUCTION 1
- MANUAL DE INSTRUCCIONES 1
- PEDAL (sólo EE.UU. y Canadá) 4
- TABLE OF CONTENTS 5
- TABLE DES MATIERES 6
- INDICE DE CONTENIDOS 7
- MACHINE IDENTIFICATION 8
- 1. VOTRE MACHINE À COUDRE 9
- 1. PRINCIPALES PARTES DE LA 9
- ACCESSORIES 10
- ACCESSOIRES 11
- ACCESORIOS 11
- SETTING UP YOUR MACHINE 12
- PRÉPARACION DE LA MAQUINA 13
- PRÉPARATION DE LA MACHINE 13
- WINDING THE BOBBIN 16
- PRÉPARATION DE LA CANETTE 17
- DEVANADO DE LA CANILLA 17
- THREADING THE BOBBIN THREAD 18
- ENFILAGE DU FIL DE CANETTE 19
- THREADING THE TOP THREAD 20
- ENFILAGE DU FIL SUPÉRIEUR 21
- ENHEBRADO DEL HILO SUPERIOR 21
- AUTOMATIQUE 22
- USO DEL ENSATADOR AUTOMATICO 23
- Changing the needle 24
- Cambio de la aguja 25
- Changement d’aiguille 25
- ADJUSTING TOP THREAD TENSION 26
- STRAIGHT STITCHING 26
- ZIG ZAG and DECORATIVE SEWING 26
- BOBBIN TENSION 26
- CHANGING PRESSER FOOT 26
- REMPLACEMENT DU PIED PRESSEUR 27
- CAMBIO DEL PIE PRENSATELAS 27
- CONTROL PANEL FUNCTIONS 28
- FONCTIONS DU PANNEAU DE 29
- COMMANDE 29
- REVERSE OPERATION BUTTON 30
- TOUCHE DE FONCTIONNEMENT 31
- INTERRUPTOR DE FUNCIONAMIENTO 31
- 2. STARTING TO SEW 32
- 2. COMMENCEZ À COUDRE 32
- 2. EMPEZER A COSER 32
- KEEPING SEAMS STRAIGHT 34
- POINT DROIT 35
- PUNTADA RECTA 35
- POUR GARDER LA COUTURE DROITE 35
- INSERTING ZIPPERS AND PIPING 36
- HAND-LOOK QUILT STITCH 36
- ZIGZAG STITCHING 38
- PLACEMENT OF PATTERNS 38
- SATIN STITCH 38
- POINT ZIGZAG 39
- PUNTADA ZIG-ZAG 39
- BLINDHEM STITCH 40
- POINT INVISIBLE 41
- PUNTADA INVISIBLE 41
- MULTI-STITCH ZIGZAG 42
- ZIGZAG MULTI-POINT 43
- ZIG-ZAG DE TRES PUNTADAS 43
- STRAIGHT STRETCH STITCH 44
- RIC-RAC STITCH 44
- HONEYCOMB STITCH 44
- OVEREDGE STITCH 44
- FEATHER STITCH 46
- PIN STITCH 46
- LADDER STITCH 46
- BLANKET STITCH 46
- SLANT PIN STITCH 48
- SLANT OVEREDGE STITCH 48
- GREEK KEY STITCH 48
- ENTREDEUX STITCH 50
- DOUBLE OVERLOCK STITCH 50
- CRISS-CROSS STITCH 50
- CROSSED STITCH 50
- DECORATIVE PATTERNS 52
- IDEAS ON DESIGN STITCHING 52
- TIPOS DE PUNTADAS DECORATIVAS 53
- MOTIFS DÉCORATIFS 53
- CONTINUOUS PATTERNS 54
- SEWING ON A BUTTON 54
- MOTIFS CONTINUEL 55
- PATRONES CONTINUOS 55
- POSE DE BOUTONS 55
- COSIDO DE BOTONES 55
- SEWING A BUTTONHOLE 56
- USING BUTTONHOLE FOOT 56
- PROCEDURE 56
- CORDED BUTTONHOLES 60
- BOUTONNIÈRES GANSEES 61
- (RENFORCEES) 61
- OJALES CON CORDON 61
- CLEANING HOOK AREA AND FEED 62
- 3. ENTRETIEN DE VOTRE MACHINE 63
- 3. CUIDE SU MAQUINA 63
- 4. OTHER INFORMATION 64
- 4. RENSEIGNEMENTS 65
- ADDITIONNELLES 65
- 4. INFORMACION OTRA 65
- 5. PERFORMANCE CHECKLIST 66
- PROBLÈMES DE COUTURE 67
- 5. CUADRO DE VERIFICACION DE 67
- RENDIMIENTO 67
- 5. VÉRIFICATION DES PETITS 67
- Part No. 82227 68
- 10/08 68
Related products and manuals for Sewing machines Singer 2009 ATHENA
(60 pages)
Sewing machines Singer 1004 VIVO User Manual
(14 pages)
(14 pages)
Sewing machines Singer 14HD854 User Manual
(56 pages)
(56 pages)
Sewing machines Singer 9100 User Manual
(84 pages)
(84 pages)
© 2020, manymanuals.com. All rights reserved. | 1.234 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals