Singer 1525 User Manual download pdf (Page 55)

A B

Sewing on buttons

Install the darning plate. (A)

Change presser foot to button sewing foot. (B) Select

zigzag stitch.

Position the work under the foot. Place the button on the

marked position, lower the foot. Adjust stitch width to "0"

and sew a few securing stitches. Set the stitch width to

number "3" - "5". Turn the handwheel to check that the

needle goes cleanly into the left and right holes of the

button (adjust the stitch width according to the button), and

slowly sew on the button with about 10 stitches. Adjust the

stitch width to "0" and sew a few securing stitches (1).

If a shank is required, place a darning needle on top of the

button and sew (2). For buttons with 4 holes, sew through

the front two holes first (1), push the work forward and then

sew through the back two holes as described (2).

L R

1 ... 54 55 56 ... 76

No comments

Singer 1525 User Manual Page 55